SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control, 7 Pin Plug, Everlast Welders, T925-0725

The Touch 4 fingertip control is an all-new approach to TIG welding amperage hand controls. The idea is simple and innovative, and the result is a steady hand and excellent control. Instead of a knob that you have to turn or a slider that you have to move while trying to hold your TIG torch steady, the Touch 4 relies on pressure applied by your finger. The Touch 4 works in steps: you apply pressure to turn on the contactor, giving you your low-amps setting, and then you increase pressure through 4 steps: 25%, 50%, 75%, and 100% of the setting on your panel. Set the amps on your panel equal to (or slightly higher than, depending on your preference) the suggested current for the thickness and metal type, and then you simply dither to create the puddle and weld that you want. This model is for Everlast welders that use the 7-pin plug (that plugs into the 7-socket remote output receptacle on the welder). Fits Everlast TIG welders with a 7-pin plug that use a 22k to 25k (25,000-ohm) or 47k to 50k (50,000-ohm) potentiometer (such as the PowerTIG, PowerPro, and PowerArc welders that require the 7-pin plug). Also note: Will not work with models having a knob on the foot control. Will not work on welders that offer lift TIG only. Will not work with MTS welders, such as Power MTS 251 SI, which requires a male plug on the foot pedal, not the female plug as shown. Simple plug and play as long as it's the correct fitting plug. Note: Will not work with any brand except Everlast. Includes 30-day money-back guarantee. US Patent 9,550,250 B2. Designed and made in the USA.

• TIG welding hand control for Everlast welders (7 pin plug).
• Press to activate gas contactor and increase amperage through four levels.
• Preset the weld current on your machine to where you want the current to be for the job.
• 25-ft cable with 7-pin plug for Everlast TIG welders (not for MTS).
• Made in USA by SSC Controls Company.